EN 573-3 klasse AW-1050A F
Voedselveilig aluminium.
Aantal: Eén vrachtwagenlading – Speciale producten op aanvraag.Aanvullende diensten: Via Cindal (de afdeling Aludium R&D):R&D-diensten, benchmarking, chemische audits, materiaalspecificatie, procesoptimalisatie, kwaliteitsbewaking, monsteranalyse, prototyping, training
BIKAR-METALLE GMBH
FABRIKANT EN DISTRIBUTEUR
Informatie en diensten
Aanvullende diensten: Stekken, delen van tekeningenEigenschappen
Algemeen
| Eigendom | Temperatuur | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|---|
| Dichtheid | 2,7 g/cm3 | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strook, blad, plaat, folie, staaf, staaf, buis | |
| 20,0 °C | 2,7 g/cm3 | F | EN 573-3 | Profiel, staaf, plat, buis, plaat |
Mechanisch
| Eigendom | Temperatuur | Waarde | Conditie | Verwante normen | Vorm | Commentaar |
|---|---|---|---|---|---|---|
| Elastische modulus | -270,0 °C | 70,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | |
| -195,0 °C | 78.4 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| -85,0 °C | 73,5 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| -30,0 °C | 71,4 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 69,0 GPa | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strook, blad, plaat, folie, staaf, staaf, buis | |||
| 20,0 °C | 60,0 - 70,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 20,0 °C | 60,0 - 69,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 20,0 °C | 69,0 - 70,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 20,0 °C | 69,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 20,0 °C | 70,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 50,0 °C | 69,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 100,0 °C | 68,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis | ||
| 100,0 °C | 68,0 - 68,6 GPa | F | EN 573-3 | Profiel, staaf, plat, buis | ||
| 100,0 °C | 68,6 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 150,0 °C | 66,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis | ||
| 150,0 °C | 66,0 - 66,5 GPa | F | EN 573-3 | Profiel, staaf, plat, buis | ||
| 150,0 °C | 66.5 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 200,0 °C | 63,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 250,0 °C | 56,0 - 57,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis | ||
| 250,0 °C | 56,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 250,0 °C | 57,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis | ||
| 300,0 °C | 50,0 GPa | F | EN 573-3 | Profiel, staaf, plat, buis | ||
| Verlenging | 23,0 % | F | EN 573-3, EN 755 | Strook, blad, plaat, folie, staaf, staaf, buis | A50 | |
| 25,0 % | F | EN 573-3, EN 755 | Strook, blad, plaat, folie, staaf, staaf, buis | A100 | ||
| 20,0 °C | 23,0 % | F | EN 573-3 | Profiel, staaf, buis | A50 | |
| 20,0 °C | 25,0 % | F | EN 573-3 | Profiel, staaf, buis | ||
| Hardheid, Brinell | 23.0 [-] | F | EN 573-3, EN 570 | Strook, blad, plaat, folie, staaf, staaf, buis | ||
| 20,0 °C | 20.0 [-] | F | EN 573-3 | Profiel, staaf, buis | ||
| Plane-Strain Fracture Toughnes | 22,0 - 35,0 MPa·√m | Typisch voor gesmeed aluminium uit de 1000-serie | ||||
| Poisson-verhouding | 20,0 °C | 0,33 [-] | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | |
| Afschuifmodulus | 25,9 GPa | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strook, blad, plaat, folie, staaf, staaf, buis | ||
| 20,0 °C | 25,0 - 26,5 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 20,0 °C | 25,0 - 25,9 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 20,0 °C | 25.9 - 26.5 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| 20,0 °C | 25,9 GPa | F | EN 573-3 | Profiel, staaf, plat, buis, plaat | ||
| Treksterkte | 60,0 MPa | F | EN 573-3, EN 755 | Strook, blad, plaat, folie, staaf, staaf, buis | ||
| 65,0 MPa | F | EN 573-3, EN 485 | Strook, blad, plaat, folie, staaf, staaf, buis | |||
| 80,0 - 130,0 MPa | F | EN 573-3, EN 1715-3, EN 1715-4 | Strook, blad, plaat, folie, staaf, staaf, buis | |||
| 20,0 °C | 60,0 MPa | F | EN 573-3 | Profile, Rod, Tube, Flat | ||
| 20.0 °C | 60.0 MPa | F | EN 573-3 | Flat | Transverse | |
| 20.0 °C | 65.0 MPa | F | EN 573-3 | Flat |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
| Coefficient of thermal expansion | -50 °C | 2.17e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube, Profile, Flat |
| -50.0 °C | 2.17e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube, Profile, Flat | |
| 20 °C | 2.17e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube, Profile, Flat | |
| 20 °C | 2.35e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube, Profile, Flat | |
| 20 °C | 2.4399999999999997e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| 20 °C | 2.5399999999999997e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| 100 °C | 2.35e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube, Profile, Flat | |
| 100.0 °C | 2.35e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube, Profile, Flat | |
| 200 °C | 2.4399999999999997e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| 200.0 °C | 2.44e-05 1/K | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| 300 °C | 2.5399999999999997e-05 1/K | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| 300.0 °C | 2.54e-05 1/K | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| Melting point | 646.0 - 657.0 °C | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| Specific heat capacity | 900.0 J/(kg·K) | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| 20.0 °C | 899.0 - 900.0 J/(kg·K) | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| 20.0 °C | 899.0 J/(kg·K) | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| 20.0 °C | 900.0 J/(kg·K) | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| Thermal conductivity | 20.0 °C | 210.0 - 220.0 W/(m·K) | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube, Profile, Flat |
| 20.0 °C | 210.0 - 229.0 W/(m·K) | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| 20.0 °C | 220.0 - 229.0 W/(m·K) | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| 20.0 °C | 229.0 W/(m·K) | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate |
Electrical
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
| Electrical conductivity | 34000000.0 - 36000000.0 S/m | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| 20.0 °C | 34800000.0 - 36000000.0 S/m | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| Electrical resistivity | 2.78e-08 - 2.94e-08 Ω·m | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| 20.0 °C | 2.8e-08 - 2.9e-08 Ω·m | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate | |
| 20.0 °C | 2.9e-08 Ω·m | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
| Aluminium | 99.5 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Profile, Rod, Flat, Tube, Strip, Sheet, Plate, Foil, Bar |
| Boron | 0.05 | F | EN 573-3 | Profile, Rod, Flat, Tube |
| Chromium | 0.01 | F | EN 573-3 | Profile, Rod, Flat, Tube |
| Copper | 0.05 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Profile, Rod, Flat, Tube, Plate, Strip, Sheet, Foil, Bar |
| Gallium | 0.03 | F | EN 573-3 | Profile, Rod, Flat, Tube |
| Iron | 0.4 % | F | EN 573-3 | Profile, Rod, Flat, Tube, Plate |
| 0.40 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Strip, Sheet, Plate, Foil, Bar, Rod, Tube | |
| Magnesium | 0.03 % | F | EN 573-3 | Profile, Rod, Flat, Tube |
| 0.05 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Profile, Rod, Flat, Tube, Plate, Strip, Sheet, Foil, Bar | |
| Manganese | 0.01 % | F | EN 573-3 | Profile, Rod, Flat, Tube |
| 0.05 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Profile, Rod, Flat, Tube, Plate, Strip, Sheet, Foil, Bar | |
| Nickel | 0.03 | F | EN 573-3 | Profile, Rod, Flat, Tube |
| Silicon | 0.1 % | F | EN 573-3 | Profile, Rod, Flat, Tube |
| 0.25 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Profile, Rod, Flat, Tube, Plate, Strip, Sheet, Foil, Bar | |
| Titanium | 0.03 % | F | EN 573-3 | Profile, Rod, Flat, Tube |
| 0.05 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Profile, Rod, Flat, Tube, Plate, Strip, Sheet, Foil, Bar | |
| Vanadium | 0.03 | F | EN 573-3 | Profile, Rod, Flat, Tube |
| Zinc | 0.05 % | F | EN 573-3 | Profile, Rod, Flat, Tube |
| 0.07 % | F | EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755 | Profile, Rod, Flat, Tube, Plate, Strip, Sheet, Foil, Bar |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative:gut (EQ:sehr gut), Protective:very good
| |
| Brazing | hard brazing (with flux/ without flux):very good / very good, friction soldering:very good, soft brazing with flux:very good
| |
| Corrosion properties | Seawater:acceptable, weathering:good
| |
| Workability | Bending / Spinning (cold):very good / very good, Impact extrusion (cold):very good, Deep drawing / upsetting (Condition) very good (H14) / very good (H12)
| |
Metaal