EN 573-3 kwaliteit AW-2017A T4510
Verouderingshardbare AlCu-legering. De legering is niet voedselveilig.
Eigenschappen
Algemeen
| Eigendom | Temperatuur | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|---|
| Dichtheid | 2,8 g/cm³ | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |
| 20,0 °C | 2,8 g/cm³ | T4510 | EN 573-3 | Profiel, staaf, buis |
Mechanisch
| Eigendom | Temperatuur | Waarde | Conditie | Verwante normen | Vorm | Commentaar |
|---|---|---|---|---|---|---|
| Elastische modulus | 72,5 GPa | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | ||
| 20,0 °C | 65,0 - 73,5 GPa | T4510 | EN 573-3 | Profiel, staaf, buis | ||
| Verlenging | 7,0 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | A100 | |
| 8,0 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | A50 | ||
| 8,0 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | A100 | ||
| 9,0 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | A100 | ||
| 10,0 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | A50 | ||
| 10,0 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | A100 | ||
| 12,0 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | A100 | ||
| 20,0 °C | 7,0 % | T4510 | EN 573-3 | Staaf | ||
| 20,0 °C | 8,0 % | T4510 | EN 573-3 | Profiel, Tube | A50 | |
| 20,0 °C | 8,0 % | T4510 | EN 573-3 | Staaf | ||
| 20,0 °C | 9,0 % | T4510 | EN 573-3 | Staaf | ||
| 20,0 °C | 10,0 % | T4510 | EN 573-3 | Staaf, buis | A50 | |
| 20,0 °C | 10,0 % | T4510 | EN 573-3 | Profiel, staaf, buis | ||
| 20,0 °C | 12,0 % | T4510 | EN 573-3 | Staaf, buis | ||
| Hardheid, Brinell | 20,0 °C | 105,0 [-] | T4510 | EN 573-3 | Profiel, staaf, buis | |
| Plane-Strain Fracture Toughnes | 22,0 - 35,0 MPa·√m | Typisch voor gesmeed aluminium uit de 2000-serie | ||||
| Poisson-verhouding | 0,33 [-] | Typisch voor gesmeed aluminium uit de 2000-serie | ||||
| Afschuifmodulus | 27,2 GPa | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | ||
| 20,0 °C | 26,0 - 28,5 GPa | T4510 | EN 573-3 | Profiel, staaf, buis | ||
| Treksterkte | 360,0 MPa | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | ||
| 370,0 MPa | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |||
| 380,0 MPa | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |||
| 390,0 MPa | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |||
| 400,0 MPa | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |||
| 20,0 °C | 360,0 MPa | T4510 | EN 573-3 | Staaf | ||
| 20,0 °C | 370,0 MPa | T4510 | EN 573-3 | Staaf | ||
| 20,0 °C | 380,0 MPa | T4510 | EN 573-3 | Profiel, staaf, buis | ||
| 20,0 °C | 390,0 MPa | T4510 | EN 573-3 | Staaf | ||
| 20,0 °C | 400,0 MPa | T4510 | EN 573-3 | Staaf, buis |
Thermisch
| Eigendom | Temperatuur | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|---|
| Coëfficiënt van thermische uitzetting | 20 °C | 2.3e-05 1/K | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf |
| 100 °C | 2.3e-05 1/K | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |
| Smeltpunt | 512,0 - 650,0 °C | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |
| Specifieke warmtecapaciteit | 20,0 °C | 921,0 J/(kg·K) | T4510 | EN 573-3 | Profiel, staaf, buis |
| Thermische geleidbaarheid | 20,0 °C | 130,0 - 200,0 W/(m·K) | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
Elektrisch
| Eigendom | Temperatuur | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|---|
| Elektrische geleidbaarheid | 20,0 °C | 18000000,0 - 28000000,0 S/m | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
| Elektrische weerstand | 3.57e-08 - 5.56e-08 ·m | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf |
Chemische eigenschappen
| Eigendom | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|
| Chroom | 0,1 % | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
| Koper | 3,5 - 4,5 % | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
| Strijkijzer | 0,7 % | T4510 | EN 573-3 | Profiel, staaf, buis |
| 0,70 % | T4510 | EN 573-3, EN 755 | Strook, plaat, plaat, buis, staaf | |
| Magnesium | 0,4 - 1,0 % | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
| Mangaan | 0,4 - 1,0 % | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
| Silicium | 0,2 - 0,8 % | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
| Zink | 0,25% | T4510 | EN 573-3, EN 755 | Profiel, staaf, buis, strook, plaat, plaat, staaf |
Technologische eigenschappen
| Eigenschap | ||
|---|---|---|
| Anodiseren | decoratief:niet geschikt, beschermend:goed
| |
| Hardsolderen | hardsolderen (met vloeimiddel/ zonder vloeimiddel):niet geschikt / niet geschikt, wrijvingssolderen:acceptabel, zachtsolderen met vloeimiddel:niet geschikt
| |
| Corrosie-eigenschappen | Zeewater:slecht, verwering:voldoende
| |
| Werkbaarheid | Buigen / Spinning (koud):goed / acceptabel, Impact extrusie (koud):acceptabel, Dieptrekken / schokken (Conditie) acceptabel (O) / acceptabel (O)
| |
Metaal
- EN 573-3 klasse 3.0505 F
- EN 573-3 klasse 3.1305 F
- EN 573-3 klasse 3.1305 O
- EN 573-3 klasse 3.1305 O3
- EN 573-3 klasse 3.3316 F
- EN 573-3 klasse AW-2017A F
- EN 573-3 klasse AW-2017A O3
- EN 573-3 klasse 3.1325 T4510
- EN 573-3 klasse 3.1645 T4510
- EN 573-3 kwaliteit AW-2024 T4510
- EN 573-3 kwaliteit AW-2017A H18