ISO 683-1 C45 Staal – Genormaliseerd of Genormaliseerd Vervormd (N)
Staal C45 is geschikt voor matig belaste componenten in de voertuigbouw, motoren- en machinebouw, zoals tandwellen, tandwielen en koppelingsonderdelen. Deze graad wordt geleverd in de genormaliseerde of genormaliseerd vervormde toestand (+N) conform ISO 683-1 en EN 10083-2.
Algemene eigenschappen
| Eigenschap | Temperatuur | Waarde | Toestand | Normen | Vorm |
|---|---|---|---|---|---|
| Dichtheid | 20 °C | 7,8 – 7,85 g/cm³ | Genormaliseerd (+N) | ISO 683-1, EN 10083-2 | Staaf, draad, plat, blad, band, gesmeed |
Mechanische eigenschappen
| Eigenschap | Temperatuur | Waarde | Toestand | Normen | Vorm |
|---|---|---|---|---|---|
| Elasticiteitsmodulus | -100 °C | 217 GPa | Genormaliseerd (+N) | ISO 683-1, EN 10083-2 | Staaf, draad, plat, blad, band, gesmeed |
| 20 °C | 210 – 212 GPa | ||||
| 100 °C | 205 – 207 GPa | ||||
| 200 °C | 195 – 199 GPa | ||||
| 300 °C | 185 – 192 GPa | ||||
| 400 °C | 175 – 184 GPa | ||||
| 500 °C | 173 – 175 GPa | ||||
| 600 °C | 164 GPa | ||||
| Uitrekking (voorspelde waarden) | 20 °C | 12,8% (dwars), 15,9% (A80), 17,7% (A80 dwars), 17,7% (A200), 19,7% (A50), 20,4% (A5) | |||
| Uitrekking (standaard) | 20 °C | 14 – 16% | |||
| Poissonverhouding | 20 °C | 0,281 | |||
| 100 °C | 0,281 | ||||
| 200 °C | 0,290 | ||||
| 300 °C | 0,291 | ||||
| 400 °C | 0,295 | ||||
| 500 °C | 0,297 | ||||
| Schuifmodulus | 20 °C | 81 – 82 GPa | |||
| 100 °C | 80 GPa | ||||
| 200 °C | 77 GPa | ||||
| 300 °C | 74 GPa | ||||
| 400 °C | 71 GPa | ||||
| 500 °C | 67 GPa | ||||
| 600 °C | 58 GPa | ||||
| Treksterkte | 20 °C | 560 – 620 MPa | Genormaliseerd (+N) | ISO 683-1, EN 10083-2, EN 10083-1 | Staaf, draad, plat, blad, band, gesmeed |
| Strekgrens | 20 °C | 275 – 340 MPa | Genormaliseerd (+N) | ISO 683-1, EN 10083-2, EN 10083-1 | Staaf, draad, plat, blad, band, gesmeed |
Thermische eigenschappen
| Eigenschap | Temperatuur | Waarde | Toestand | Normen | Vorm |
|---|---|---|---|---|---|
| Warmteuitdingscoëfficiënt | -100 °C | 1,08·10⁻⁵ 1/K | Genormaliseerd (+N) | ISO 683-1, EN 10083-2 | Staaf, draad, plat, blad, band, gesmeed |
| 20 °C | 1,19·10⁻⁵ 1/K | ||||
| 100 °C | 1,11 – 1,25·10⁻⁵ 1/K | ||||
| 200 °C | 1,21 – 1,30·10⁻⁵ 1/K | ||||
| 300 °C | 1,29 – 1,36·10⁻⁵ 1/K | ||||
| 400 °C | 1,35 – 1,41·10⁻⁵ 1/K | ||||
| 500 °C | 1,45·10⁻⁵ 1/K | ||||
| 600 °C | 1,49·10⁻⁵ 1/K | ||||
| Maximale diensttemperatuur | – | -25 tot 480 °C (langdurig), 500 °C (typisch koolstofstaal) | |||
| Smeltpunt | – | 1380 – 1514 °C (typisch middelkoolstofstaal) | |||
| Specifieke warmte | -100 °C | 423 J/(kg·K) | |||
| 20 °C | 461 – 480 J/(kg·K) | ||||
| 100 °C | 479 – 500 J/(kg·K) | ||||
| 200 °C | 499 – 550 J/(kg·K) | ||||
| 300 °C | 517 – 590 J/(kg·K) | ||||
| 400 °C | 536 J/(kg·K) | ||||
| 500 °C | 558 J/(kg·K) | ||||
| 600 °C | 587 J/(kg·K) | ||||
| Warmtegeleiding | 20 °C | 41,7 – 52 W/(m·K) | |||
| 100 °C | 43,4 – 50,6 W/(m·K) | ||||
| 200 °C | 43,2 – 48,1 W/(m·K) | ||||
| 300 °C | 41,4 – 45,7 W/(m·K) | ||||
| 400 °C | 39,1 W/(m·K) | ||||
| 500 °C | 36,7 W/(m·K) | ||||
| 600 °C | 34,1 W/(m·K) | ||||
| Temperatuurgeleiding | 20 °C | 11,6 mm²/s | |||
| 100 °C | 11,3 mm²/s | ||||
| 200 °C | 10,5 mm²/s | ||||
| 300 °C | 9,5 mm²/s | ||||
| 400 °C | 8,3 mm²/s | ||||
| 500 °C | 7,1 mm²/s | ||||
| 600 °C | 5,8 mm²/s |
Elektrische eigenschappen
| Eigenschap | Temperatuur | Waarde | Toestand | Normen | Vorm |
|---|---|---|---|---|---|
| Elektrische weerstand | 20 °C | 1,2·10⁻⁷ – 2,5·10⁻⁷ Ω·m | Genormaliseerd (+N) | ISO 683-1, EN 10083-2 | Staaf, draad, plat, blad, band, gesmeed |
| 100 °C | 2,95·10⁻⁷ Ω·m | ||||
| 200 °C | 3,65·10⁻⁷ Ω·m | ||||
| 300 °C | 4,53·10⁻⁷ Ω·m | ||||
| 400 °C | 5,56·10⁻⁷ Ω·m | ||||
| 500 °C | 6,74·10⁻⁷ Ω·m | ||||
| 600 °C | 8,13·10⁻⁷ Ω·m |
Chemische samenstelling (gewicht%)
| Element | Bereik | Toestand | Normen | Vorm |
|---|---|---|---|---|
| Koolstof (C) | 0,42 – 0,50 | Genormaliseerd (+N) | ISO 683-1, EN 10083-2, EN 10083-1 | Staaf, draad, plat, blad, band, gesmeed |
| Chroom (Cr) | ≤ 0,40 | |||
| Koper (Cu) | ≤ 0,30 | |||
| Mangaan (Mn) | 0,50 – 0,80 | |||
| Molybdeen (Mo) | ≤ 0,10 | |||
| Nikkel (Ni) | ≤ 0,40 | |||
| Fosfor (P) | ≤ 0,045 | |||
| Silicium (Si) | 0,10 – 0,40 | |||
| Zwafel (S) | ≤ 0,045 |
Technologische eigenschappen
Disclaimer leverancier: De gegeven informatie is een globale beschrijving; sommige eigenschappen kunnen afhangen van factoren zoals productdikte. Raadpleeg de leverancier of de betreffende norm voor nadere specificaties.
Metaal
- EN 10225 S355G7 Staal – Genormaliseerd of Genormaliseerd Gevormd (N) voor Superieure Verwerkbaarheid en Lasbaarheid
- EN 10225 S355G8 Staal – Genormaliseerd of Genormaliseerd-Gevormd (+N) Kwaliteit
- DIN 2394-2 Grade St 28 – Genormaliseerd en Genormaliseerd Vormgegeven Staal (+N)
- EN 10273 P460NH: Genormaliseerde staal voor hoge temperaturen in drukhouden
- EN 10297-1 Gehalte C55Pb – Genormaliseerd/Vormgegeven Staal
- EN 10297-1 Graad C35Pb: Genormaliseerd en Genormaliseerd Gevormd Staal
- EN 10297-1 Graad C45Pb: Genormaliseerd of Genormaliseerd-Gevormd Staal (+N)
- EN 10297-1 Graad C60Pb Genormaliseerd/Genormaliseerd Gevormd Staal (+N): Belangrijkste Mechanische Eigenschappen
- EN 10297-1 Gehalte 28Mn6 Genormaliseerd Staal – Technische Specificaties
- EN 10297‑1 Gehalte 36Mn5 – Genormaliseerd / Genormaliseerd Gevormd (+N) Staaleigenschappen
- EN 10297‑1 Gehalte Cm60: Eigenschappen van Genormaliseerd en Genormaliseerd Gevormd (+N) Staal