EN 573-3 kwaliteit AW-3103 H38
Eigenschappen
Algemeen
| Eigendom | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|
| Dichtheid | 2,73 g/cm³ | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
Mechanisch
| Eigendom | Waarde | Conditie | Verwante normen | Vorm | Commentaar |
|---|---|---|---|---|---|
| Buigen Vermoeidheid Kracht | 75,0 MPa | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis | |
| Elastische modulus | 69,5 GPa | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis | |
| Plane-Strain Fracture Toughnes | 22,0 - 35,0 MPa·√m | Typisch voor gesmeed aluminium uit de 3000-serie | |||
| Poisson-verhouding | 0,33 [-] | Typisch voor gesmeed aluminium uit de 3000-serie | |||
| Afschuifmodulus | 26.1 GPa | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis | |
| Treksterkte | 190,0 MPa | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
Thermisch
| Eigendom | Temperatuur | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|---|
| Coëfficiënt van thermische uitzetting | 20 °C | 2.35e-05 1/K | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| 100 °C | 2.35e-05 1/K | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis | |
| Smeltpunt | 645,0 - 655,0 °C | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis | |
| Specifieke warmtecapaciteit | 893,0 J/(kg·K) | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis | |
| Thermische geleidbaarheid | 160,0 - 200,0 W/(m·K) | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
Elektrisch
| Eigendom | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|
| Elektrische geleidbaarheid | 22000000,0 - 28000000,0 S/m | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| Elektrische weerstand | 3.57e-08 - 4.55e-08 ·m | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
Chemische eigenschappen
| Eigendom | Waarde | Conditie | Verwante normen | Vorm |
|---|---|---|---|---|
| Chroom | 0,1 % | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| Koper | 0,1 % | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| Strijkijzer | 0,70 % | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| Magnesium | 0,3 % | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| Mangaan | 0,9 - 1,5 % | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| Silicium | 0,5 % | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
| Zink | 0,2 % | H38 | EN 573-3, EN 1592 | Strook, blad, plaat, folie, staaf, staaf, buis |
Technologische eigenschappen
| Eigenschap | ||
|---|---|---|
| Anodiseren | decoratief:voldoende, beschermend:zeer goed
| |
| Hardsolderen | hardsolderen (met vloeimiddel/ zonder vloeimiddel):zeer goed tot goed / zeer goed, wrijvingssolderen:zeer goed, zachtsolderen met vloeimiddel:zeer goed
| |
| Corrosie-eigenschappen | Zeewater:goed, weersinvloeden:zeer goed
| |
| Werkbaarheid | Buigen / spinnen (koud):zeer goed / zeer goed, slagextrusie (koud):goed, dieptrekken / schokken (staat) zeer goed (O) / zeer goed (H12)
| |
Metaal
- EN 573-3 klasse AW-3103 O3
- EN 573-3 kwaliteit AW-5040 H38
- EN 573-3 klasse 3.0515 H38
- EN 573-3 kwaliteit AW-3005 H38
- EN 573-3 klasse 3.0525 H38
- EN 573-3 kwaliteit AW-3103 H36
- EN 573-3 klasse 3.3315 H38
- EN 573-3 klasse 3.3316 H38
- EN 573-3 klasse 3.3547 H38
- EN 573-3 klasse 3.3555 H38
- EN 573-3 klasse AW-3103 H224